Upload artwork. Nest the parts. Calculate material cost.
Shared rates for new quotes. Client percentages apply after CC1, to Price 2 only.
Price 2 adjustment: 0%. Set each client's percentage in Customers.
PDF-compatible AI or vector PDF · Up to 25 MB · Text must be outlined. The server reads all available paths; check the preview for missing parts. If conversion fails, fit all artwork inside one artboard and save again.
For FB(F) / FB only. Uses the same material and finish in 0.5 mm.
Strips = path length ÷ 2400 mm, rounded up. Edge material is added to Price 1.
Calculated from the material’s FB(F), FB or RC setting and thickness. Choose the setting on the Materials page.
Straight sections use the material speed. Curves use 80% speed (20% slower); each cutting contour (including holes) adds 2 seconds for travel. These reference settings stay fixed:
Uses saved cutting rates above. Remaining seconds above 9 round up; 9 or less round down. CC1 = rate × [(rounded minutes + 1 × 2) × 2]. Materials Qty is fixed at 1.
Check the usable stock dimensions for the selected material. Parts too large to fit are quoted individually at width × height plus 10% material area.
Sign in to load materials.
Choose artwork and material to calculate Price 1. Price 2 uses the artwork cutting path length.
Check that all intended artwork appears below. A converter cannot recover artwork absent from the AI file’s PDF-compatible data.